Direct Rendering in VMWare 5

I've been trying to convince my dad to give up winblows and make the gentoo switch. I installed to VMWare Workstation 5 with windows xp as host. The Pc is Dell Dimension 2400, little over 1gig ram, on board video (no agp or pci-e but will be ordering FX5200 256Mb pci within the week ) New hd is on the way so a legitimate install is in the works, in the meantime however, I can't seem to get direct rendering working. I'm going to post my log and dmesg, also my xorg.conf It's not really a big deal since full install is inevitable, I'm doing this more for the experience now. Any suggestions would be appreciated.dmesg:

Code:

Linux version 2.6.13-gentoo-r3 (root@Tux) (gcc version 3.3.6 (Gentoo 3.3.6, ssp-3.3.6-1.0, pie-8.7.8)) #1 SMP Mon Oct 31 10:49:45 CST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000027ef0000 (usable) BIOS-e820: 0000000027ef0000 - 0000000027efc000 (ACPI data) BIOS-e820: 0000000027efc000 - 0000000027f00000 (ACPI NVS) BIOS-e820: 0000000027f00000 - 0000000028000000 (usable) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 640MB LOWMEM available. found SMP MP-table at 000f6ce0 On node 0 totalpages: 163840 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 159744 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI present. ACPI: RSDP (v000 PTLTD? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?) @ 0x000f6c70 ACPI: RSDT (v001 PTLTD? ? RSDT? ?0x06040000? LTP 0x00000000) @ 0x27ef8062 ACPI: FADT (v001 INTEL? 440BX? ? 0x06040000 PTL? 0x000f4240) @ 0x27efbf14 ACPI: MADT (v001 PTLTD? ? ? APIC? ?0x06040000? LTP 0x00000000) @ 0x27efbf88 ACPI: BOOT (v001 PTLTD? $SBFTBL$ 0x06040000? LTP 0x00000001) @ 0x27efbfd8 ACPI: DSDT (v001 PTLTD? Custom? ?0x06040000 MSFT 0x0100000d) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 17 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode:? Flat.? Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 28000000 (gap: 28000000:d6c00000) Built 1 zonelists Kernel command line: vga=ask hda=ide-scsi hdb=ide-scsi root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda3 udev doscsi ide_setup: hda=ide-scsi ide_setup: hdb=ide-scsi mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 CPU 0 irqstacks, hard=c0483000 soft=c047b000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2404.240 MHz processor. Using tsc for high-res timesource Speakup v-2.00 CVS: Tue Aug 16 15:56:58 EDT 2005 : initialized Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 642940k/655360k available (2574k kernel code, 11664k reserved, 741k data, 224k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4852.15 BogoMIPS (lpj=9704316) Mount-cache hash table entries: 512 Couldn't initialize miscdevice /dev/synth. CPU: After generic identify, caps: 0febfbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0febfbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: 0febfbff 00000000 00000000 00000080 00000000 00000000 00000000 mtrr: v2.0 (20020519) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 08 Total of 1 processors activated (4852.15 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 Brought up 1 CPUs checking if image is initramfs... it is Freeing initrd memory: 1477k freed NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd9a0, last bus=1 PCI: Using configuration type 1 ACPI: Subsystem revision 20050408 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [_SB_.PCI0] segment is 0 Boot video device is 0000:00:0f.0 ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq".? If it helps, post a report PCI: Cannot allocate resource region 4 of device 0000:00:07.1 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:01.0 to 64 Simple Boot Flag at 0x36 set to 0x1 Squashfs 2.2 (released 2005/07/03) (C) 2002-2005 Phillip Lougher SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API Limiting direct PCI/PCI transfers. Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 440BX Chipset. agpgart: AGP aperture is 64M @ 0xec000000 vesafb: VMware, Inc, VMware virtual machine, 2.0 (OEM: V M ware, Inc. VBE support 2.0) vesafb: VBE version: 2.0 vesafb: monitor limits: vf = 0 Hz, hf = 0 kHz, clk = 0 MHz vesafb: scrolling: redraw mtrr: your processor doesn't support write-combining Console: switching to colour frame buffer device 100x37 vesafb: framebuffer at 0xf0000000, mapped to 0xe8880000, using 16384k, total 16384k fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G chipsets intelfb: Version 0.9.2 PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A ttyS1 at I/O 0x2f8 (irq = 0) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] mice: PS/2 mouse device common for all mice io scheduler noop registered io scheduler deadline registered input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 0000:00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1470-0x1477, BIOS settings: hda:DMA, hdb:DMA Probing IDE interface ide0... hda: VMware Virtual IDE CDROM Drive, ATAPI CD/DVD-ROM drive hdb: VMware Virtual IDE CDROM Drive, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 16 scsi: ***** BusLogic SCSI Driver Version 2.1.16 of 18 July 2002 ***** scsi: Copyright 1995-1998 by Leonard N. Zubkoff scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter scsi0:? ?Firmware Version: 5.07B, I/O Address: 0x1440, IRQ Channel: 16/Level scsi0:? ?PCI Bus: 0, Device: 16, Address: 0xE8800000, Host Adapter SCSI ID: 7 scsi0:? ?Parity Checking: Enabled, Extended Translation: Enabled scsi0:? ?Synchronous Negotiation: Ultra, Wide Negotiation: Enabled scsi0:? ?Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled scsi0:? ?Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211 scsi0:? ?Driver Queue Depth: 211, Host Adapter Queue Depth: 192 scsi0:? ?Tagged Queue Depth: Automatic, Untagged Queue Depth: 3 scsi0: *** BusLogic BT-958 Initialized Successfully *** scsi0 : BusLogic BT-958 Vendor: VMware,? ?Model: VMware Virtual S? Rev: 1.0 Type:? ?Direct-Access? ? ? ? ? ? ? ? ? ? ? ANSI SCSI revision: 02 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 16 GDT-HA: Storage RAID Controller Driver. Version: 3.04 GDT-HA: Found 0 PCI Storage RAID Controllers ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device scsi1 : SCSI host adapter emulation for IDE ATAPI devices Vendor: _NEC? ? ? Model: DVD_RW ND-2500A? ?Rev: 1.06 Type:? ?CD-ROM? ? ? ? ? ? ? ? ? ? ? ? ? ? ?ANSI SCSI revision: 02 scsi2 : SCSI host adapter emulation for IDE ATAPI devices Vendor: _NEC? ? ? Model: DVD_RW ND-3540A? ?Rev: 1.01 Type:? ?CD-ROM? ? ? ? ? ? ? ? ? ? ? ? ? ? ?ANSI SCSI revision: 02 libata version 1.12 loaded. SCSI device sda: 31457280 512-byte hdwr sectors (16106 MB) sda: asking for cache data failed sda: assuming drive cache: write through SCSI device sda: 31457280 512-byte hdwr sectors (16106 MB) sda: asking for cache data failed sda: assuming drive cache: write through sda: sda1 sda2 sda3 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0 sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Attached scsi CD-ROM sr1 at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,? type 0 Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0,? type 5 Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 0,? type 5 SCSI Media Changer driver v0.25 aoe: aoe_init: AoE v2.6-10 initialised. pd: pd version 1.05, major 45, cluster 64, nice 0 pda: Autoprobe failed pd: no valid drive found pcd: pcd version 1.07, major 46, nice 0 pcd0: Autoprobe failed pcd: No CD-ROM drive found pf: pf version 1.04, major 47, cluster 64, nice 0 pf: No ATAPI disk detected EISA: Probing bus 0 at eisa.0 Cannot allocate resource for EISA slot 1 EISA: Detected 0 cards. NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode Freeing unused kernel memory: 224k freed usbcore: registered new driver usbfs usbcore: registered new driver hub usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:07.2[D] -> GSI 19 (level, low) -> IRQ 17 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 17, io base 0x00001060 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) sl811: driver sl811-hcd, 19 May 2005 ieee1394: Initialized config rom entry `ip1394' sbp2: $Rev: 1306 $ Ben Collins device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com NCR53c406a: no available ports found scsi: Detection failed (no card) qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card! NCR53c406a: no available ports found imm: Version 2.05 (for Linux 2.4.0) sym53c416.c: Version 1.0.0-ac ReiserFS: sda3: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sda3 VFS: Can't find ext3 filesystem on dev sda3. VFS: Can't find an ext2 filesystem on dev sda3. SQUASHFS error: Can't find a SQUASHFS superblock on sda3 FAT: bogus number of FAT structure VFS: Can't find a valid FAT filesystem on dev sda3. scsi0: Tagged Queuing now active for Target 0 Unable to identify CD-ROM format. UDF-fs: No VRS found XFS mounting filesystem sda3 Ending clean XFS mount for filesystem: sda3 sr0: Hmm, seems the drive doesn't support multisession CD's Adding 498004k swap on /dev/sda2.? Priority:-1 extents:1

Xorg.0.log:

Code:

X Window System Version 6.8.2 Release Date: 9 February 2005 X Protocol Version 11, Revision 0, Release 6.8.2 Build Operating System: Linux 2.6.13-gentoo-r3 i686 [ELF] Current Operating System: Linux Tux 2.6.13-gentoo-r3 #1 SMP Mon Oct 31 10:49:45 CST 2005 i686 Build Date: 23 October 2005 Before reporting problems, check http://wiki.X.Org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 31 14:11:53 2005 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) |? ?|-->Monitor "vmware" (**) |? ?|-->Device "VMware SVGA" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbModel" "dell101" (**) XKB: model: "dell101" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (WW) The directory "/usr/share/fonts/CID/" does not exist. Entry deleted from font path. (==) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/" (==) RgbPath set to "/usr/lib/X11/rgb" (==) ModulePath set to "/usr/lib/modules" (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Driver: 0.7 X.Org XInput driver : 0.4 X.Org Server Extension : 0.2 X.Org Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/lib/modules/libpcidata.a (II) Module pcidata: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (++) using VT number 7(II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7190 card 15ad,1976 rev 01 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 01 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 8086,7110 card 15ad,1976 rev 08 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 8086,7111 card 15ad,1976 rev 01 class 01,01,8a hdr 00 (II) PCI: 00:07:2: chip 8086,7112 card 15ad,1976 rev 00 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 8086,7113 card 15ad,1976 rev 08 class 06,80,00 hdr 80 (II) PCI: 00:0f:0: chip 15ad,0405 card 15ad,0405 rev 00 class 03,00,00 hdr 00 (II) PCI: 00:10:0: chip 104b,1040 card 104b,1040 rev 01 class 01,00,00 hdr 00 (II) PCI: 00:11:0: chip 1022,2000 card 1022,2000 rev 10 class 02,00,00 hdr 00 (II) PCI: 00:12:0: chip 1274,1371 card 1274,1371 rev 02 class 04,01,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1? ?0? ?0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1? ?0? ?0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1? ?0? ?0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0080 (VGA_EN is cleared) (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(0:15:0) VMWare Inc unknown chipset (0x0405) rev 0, Mem @ 0xf0000000/27, 0xe8000000/23, I/O @ 0x1460/4 (II) Addressable bus resource ranges are [0] -1? ?0? ?0x00000000 - 0xffffffff (0x0) MX[B] [1] -1? ?0? ?0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1? ?0? ?0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1? ?0? ?0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1? ?0? ?0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1? ?0? ?0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1? ?0? ?0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1? ?0? ?0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1? ?0? ?0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xec000000 from 0xefffffff to 0xebffffff (II) Active PCI resource ranges: [0] -1? ?0? ?0xe8800000 - 0xe880001f (0x20) MX[B] [1] -1? ?0? ?0xec000000 - 0xebffffff (0x0) MX[B]O [2] -1? ?0? ?0xe8000000 - 0xe87fffff (0x800000) MX[B](B) [3] -1? ?0? ?0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [4] -1? ?0? ?0x00001400 - 0x0000143f (0x40) IX[B] [5] -1? ?0? ?0x00001080 - 0x000010ff (0x80) IX[B] [6] -1? ?0? ?0x00001440 - 0x0000145f (0x20) IX[B] [7] -1? ?0? ?0x00001060 - 0x0000107f (0x20) IX[B] [8] -1? ?0? ?0x00001470 - 0x0000147f (0x10) IX[B] [9] -1? ?0? ?0x00001460 - 0x0000146f (0x10) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1? ?0? ?0xe8800000 - 0xe880001f (0x20) MX[B] [1] -1? ?0? ?0xec000000 - 0xebffffff (0x0) MX[B]O [2] -1? ?0? ?0xe8000000 - 0xe87fffff (0x800000) MX[B](B) [3] -1? ?0? ?0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [4] -1? ?0? ?0x00001400 - 0x0000143f (0x40) IX[B] [5] -1? ?0? ?0x00001080 - 0x000010ff (0x80) IX[B] [6] -1? ?0? ?0x00001440 - 0x0000145f (0x20) IX[B] [7] -1? ?0? ?0x00001060 - 0x0000107f (0x20) IX[B] [8] -1? ?0? ?0x00001470 - 0x0000147f (0x10) IX[B] [9] -1? ?0? ?0x00001460 - 0x0000146f (0x10) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1? ?0? ?0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1? ?0? ?0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1? ?0? ?0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1? ?0? ?0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1? ?0? ?0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1? ?0? ?0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1? ?0? ?0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1? ?0? ?0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1? ?0? ?0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1? ?0? ?0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1? ?0? ?0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1? ?0? ?0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1? ?0? ?0xe8800000 - 0xe880001f (0x20) MX[B] [6] -1? ?0? ?0xec000000 - 0xebffffff (0x0) MX[B]O [7] -1? ?0? ?0xe8000000 - 0xe87fffff (0x800000) MX[B](B) [8] -1? ?0? ?0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [9] -1? ?0? ?0x0000ffff - 0x0000ffff (0x1) IX[B] [10] -1? ?0? ?0x00000000 - 0x000000ff (0x100) IX[B] [11] -1? ?0? ?0x00001400 - 0x0000143f (0x40) IX[B] [12] -1? ?0? ?0x00001080 - 0x000010ff (0x80) IX[B] [13] -1? ?0? ?0x00001440 - 0x0000145f (0x20) IX[B] [14] -1? ?0? ?0x00001060 - 0x0000107f (0x20) IX[B] [15] -1? ?0? ?0x00001470 - 0x0000147f (0x10) IX[B] [16] -1? ?0? ?0x00001460 - 0x0000146f (0x10) IX[B](B) (II) LoadModule: "freetype" (II) Loading /usr/lib/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 6.8.2, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "extmod" (II) Loading /usr/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "glx" (II) Loading /usr/lib/modules/extensions/libglx.a (II) Module glx: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/lib/modules/extensions/libdri.a (II) Module dri: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/lib/modules/linux/libdrm.a (II) Module drm: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension XFree86-DRI (II) LoadModule: "dbe" (II) Loading /usr/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "record" (II) Loading /usr/lib/modules/extensions/librecord.a (II) Module record: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension RECORD (II) LoadModule: "xtrap" (II) Loading /usr/lib/modules/extensions/libxtrap.a (II) Module xtrap: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension DEC-XTRAP (II) LoadModule: "type1" (II) Loading /usr/lib/modules/fonts/libtype1.a (II) Module type1: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "vmware" (II) Loading /usr/lib/modules/drivers/vmware_drv.o (II) Module vmware: vendor="X.Org Foundation" compiled for 6.8.2, module version = 10.10.2 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 0.7 (II) LoadModule: "vmmouse" (II) Loading /usr/lib/modules/input/vmmouse_drv.o (II) Module vmmouse: vendor="X.Org Foundation" compiled for 4.3.99.902, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) VMWARE(0): VMMOUSE module was loaded (II) Loading sub module "mouse" (II) LoadModule: "mouse" (II) Loading /usr/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) LoadModule: "keyboard" (II) Loading /usr/lib/modules/input/keyboard_drv.o (II) Module keyboard: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) VMWARE: driver for VMware SVGA: vmware0405, vmware0710 (II) Primary Device is: PCI 00:0f:0 (--) Assigning device section with no busID to primary device (--) Chipset vmware0405 found (II) resource ranges after xf86ClaimFixedResources() call: [0] 0? ?0? ?0x000b8000 - 0x000bffff (0x8000) MX[B] [1] 0? ?0? ?0x000b0000 - 0x000b7fff (0x8000) MX[B] [2] 0? ?0? ?0x000a0000 - 0x000affff (0x10000) MX[B] [3] -1? ?0? ?0xffe00000 - 0xffffffff (0x200000) MX[B](B) [4] -1? ?0? ?0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [5] -1? ?0? ?0x000f0000 - 0x000fffff (0x10000) MX[B] [6] -1? ?0? ?0x000c0000 - 0x000effff (0x30000) MX[B] [7] -1? ?0? ?0x00000000 - 0x0009ffff (0xa0000) MX[B] [8] -1? ?0? ?0xe8800000 - 0xe880001f (0x20) MX[B] [9] -1? ?0? ?0xec000000 - 0xebffffff (0x0) MX[B]O [10] -1? ?0? ?0xe8000000 - 0xe87fffff (0x800000) MX[B](B) [11] -1? ?0? ?0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [12] 0? ?0? ?0x000003c0 - 0x000003df (0x20) IX[B] [13] 0? ?0? ?0x000003b0 - 0x000003bb (0xc) IX[B] [14] -1? ?0? ?0x0000ffff - 0x0000ffff (0x1) IX[B] [15] -1? ?0? ?0x00000000 - 0x000000ff (0x100) IX[B] [16] -1? ?0? ?0x00001400 - 0x0000143f (0x40) IX[B] [17] -1? ?0? ?0x00001080 - 0x000010ff (0x80) IX[B] [18] -1? ?0? ?0x00001440 - 0x0000145f (0x20) IX[B] [19] -1? ?0? ?0x00001060 - 0x0000107f (0x20) IX[B] [20] -1? ?0? ?0x00001470 - 0x0000147f (0x10) IX[B] [21] -1? ?0? ?0x00001460 - 0x0000146f (0x10) IX[B](B) (II) resource ranges after probing: [0] 0? ?0? ?0x000b8000 - 0x000bffff (0x8000) MX[B] [1] 0? ?0? ?0x000b0000 - 0x000b7fff (0x8000) MX[B] [2] 0? ?0? ?0x000a0000 - 0x000affff (0x10000) MX[B] [3] -1? ?0? ?0xffe00000 - 0xffffffff (0x200000) MX[B](B) [4] -1? ?0? ?0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [5] -1? ?0? ?0x000f0000 - 0x000fffff (0x10000) MX[B] [6] -1? ?0? ?0x000c0000 - 0x000effff (0x30000) MX[B] [7] -1? ?0? ?0x00000000 - 0x0009ffff (0xa0000) MX[B] [8] -1? ?0? ?0xe8800000 - 0xe880001f (0x20) MX[B] [9] -1? ?0? ?0xec000000 - 0xebffffff (0x0) MX[B]O [10] -1? ?0? ?0xe8000000 - 0xe87fffff (0x800000) MX[B](B) [11] -1? ?0? ?0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [12] 0? ?0? ?0x000003c0 - 0x000003df (0x20) IX[B] [13] 0? ?0? ?0x000003b0 - 0x000003bb (0xc) IX[B] [14] -1? ?0? ?0x0000ffff - 0x0000ffff (0x1) IX[B] [15] -1? ?0? ?0x00000000 - 0x000000ff (0x100) IX[B] [16] -1? ?0? ?0x00001400 - 0x0000143f (0x40) IX[B] [17] -1? ?0? ?0x00001080 - 0x000010ff (0x80) IX[B] [18] -1? ?0? ?0x00001440 - 0x0000145f (0x20) IX[B] [19] -1? ?0? ?0x00001060 - 0x0000107f (0x20) IX[B] [20] -1? ?0? ?0x00001470 - 0x0000147f (0x10) IX[B] [21] -1? ?0? ?0x00001460 - 0x0000146f (0x10) IX[B](B) (II) Setting vga for screen 0. (--) VMWARE(0): VMware SVGA regs at (0x1460, 0x1461) (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/modules/libvgahw.a (II) Module vgahw: vendor="X.Org Foundation" compiled for 6.8.2, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.7 (--) VMWARE(0): caps:? 0x000083E2 (--) VMWARE(0): depth: 24 (--) VMWARE(0): bpp:? ?32 (--) VMWARE(0): vram:? 16777216 (--) VMWARE(0): pbase: 0xf0000000 (--) VMWARE(0): mwidt: 2360 (--) VMWARE(0): mheig: 1770 (--) VMWARE(0): depth: 24 (--) VMWARE(0): bpp:? ?32 (--) VMWARE(0): w.red: 8 (--) VMWARE(0): w.grn: 8 (--) VMWARE(0): w.blu: 8 (--) VMWARE(0): vis:? ?4 (**) VMWARE(0): Depth 24, (**) framebuffer bpp 32 (==) VMWARE(0): RGB weight 888 (==) VMWARE(0): Default visual is TrueColor (==) VMWARE(0): Using HW cursor (==) VMWARE(0): Using gamma correction (1.0, 1.0, 1.0) (II) VMWARE(0): vmware: Using hsync range of 1.00-1000.00 kHz (II) VMWARE(0): vmware: Using vrefresh range of 1.00-1000.00 Hz (II) VMWARE(0): Clock range:? ?0.00 to 400000.00 MHz (II) VMWARE(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) VMWARE(0): Not using default mode "2048x1536" (width too large for virtual size) (II) VMWARE(0): Not using default mode "2048x1536" (width too large for virtual size) (II) VMWARE(0): Not using default mode "2048x1536" (width too large for virtual size) (II) VMWARE(0): Not using default mode "1920x1440" (width too large for virtual size) (II) VMWARE(0): Not using default mode "1920x1440" (width too large for virtual size) (II) VMWARE(0): Not using default mode "1920x1440" (width too large for virtual size) (II) VMWARE(0): Not using default mode "1856x1392" (width too large for virtual size) (II) VMWARE(0): Not using default mode "1856x1392" (width too large for virtual size) (II) VMWARE(0): Not using default mode "1792x1344" (width too large for virtual size) (II) VMWARE(0): Not using default mode "1792x1344" (width too large for virtual size) (II) VMWARE(0): Not using mode "1600x1200" (width too large for virtual size) (II) VMWARE(0): Not using default mode "1400x1050" (width too large for virtual size) (II) VMWARE(0): Not using default mode "1400x1050" (width too large for virtual size) (--) VMWARE(0): Virtual size is 1280x1024 (pitch 1280) (**) VMWARE(0): *Mode "1280x1024": 100.0 MHz, 66.7 kHz, 51.3 Hz (II) VMWARE(0): Modeline "1280x1024"? 100.00? 1280 1300 1400 1500? 1024 1100 1200 1300 (**) VMWARE(0):? Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz (II) VMWARE(0): Modeline "1280x960"? 148.50? 1280 1344 1504 1728? 960 961 964 1011 +hsync +vsync (**) VMWARE(0):? Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz (II) VMWARE(0): Modeline "1280x960"? 108.00? 1280 1376 1488 1800? 960 961 964 1000 +hsync +vsync (**) VMWARE(0):? Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz (II) VMWARE(0): Modeline "1152x864"? 108.00? 1152 1216 1344 1600? 864 865 868 900 +hsync +vsync (**) VMWARE(0):? Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz (II) VMWARE(0): Modeline "1152x768"? ?65.00? 1152 1178 1314 1472? 768 771 777 806 +hsync +vsync (**) VMWARE(0):? Mode "1024x768": 100.0 MHz, 76.9 kHz, 76.9 Hz (II) VMWARE(0): Modeline "1024x768"? 100.00? 1024 1100 1200 1300? 768 800 900 1000 (**) VMWARE(0):? Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz (II) VMWARE(0): Modeline "832x624"? ?57.28? 832 864 928 1152? 624 625 628 667 -hsync -vsync (**) VMWARE(0):? Mode "800x600": 100.0 MHz, 90.9 kHz, 101.0 Hz (II) VMWARE(0): Modeline "800x600"? 100.00? 800 900 1000 1100? 600 700 800 900 (**) VMWARE(0):? Mode "640x480": 100.0 MHz, 111.1 kHz, 158.7 Hz (II) VMWARE(0): Modeline "640x480"? 100.00? 640 700 800 900? 480 500 600 700 (**) VMWARE(0):? Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz (II) VMWARE(0): Modeline "720x400"? ?35.50? 720 756 828 936? 400 401 404 446 -hsync +vsync (**) VMWARE(0):? Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) VMWARE(0): Modeline "640x400"? ?31.50? 640 672 736 832? 400 401 404 445 -hsync +vsync (**) VMWARE(0):? Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) VMWARE(0): Modeline "640x350"? ?31.50? 640 672 736 832? 350 382 385 445 +hsync -vsync (==) VMWARE(0): DPI set to (75, 75) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/modules/libfb.a (II) Module fb: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.2 (II) Loading sub module "shadowfb" (II) LoadModule: "shadowfb" (II) Loading /usr/lib/modules/libshadowfb.a (II) Module shadowfb: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.2 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/lib/modules/libramdac.a (II) Module ramdac: vendor="X.Org Foundation" compiled for 6.8.2, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.7 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/modules/libxaa.a (II) Module xaa: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.2.0 ABI class: X.Org Video Driver, version 0.7 (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC?? No, I don't. (II) resource ranges after preInit: [0] 0? ?0? ?0x000b8000 - 0x000bffff (0x8000) MX[B] [1] 0? ?0? ?0x000b0000 - 0x000b7fff (0x8000) MX[B] [2] 0? ?0? ?0x000a0000 - 0x000affff (0x10000) MX[B] [3] -1? ?0? ?0xffe00000 - 0xffffffff (0x200000) MX[B](B) [4] -1? ?0? ?0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [5] -1? ?0? ?0x000f0000 - 0x000fffff (0x10000) MX[B] [6] -1? ?0? ?0x000c0000 - 0x000effff (0x30000) MX[B] [7] -1? ?0? ?0x00000000 - 0x0009ffff (0xa0000) MX[B] [8] -1? ?0? ?0xe8800000 - 0xe880001f (0x20) MX[B] [9] -1? ?0? ?0xec000000 - 0xebffffff (0x0) MX[B]O [10] -1? ?0? ?0xe8000000 - 0xe87fffff (0x800000) MX[B](B) [11] -1? ?0? ?0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [12] 0? ?0? ?0x000003c0 - 0x000003df (0x20) IX[B] [13] 0? ?0? ?0x000003b0 - 0x000003bb (0xc) IX[B] [14] -1? ?0? ?0x0000ffff - 0x0000ffff (0x1) IX[B] [15] -1? ?0? ?0x00000000 - 0x000000ff (0x100) IX[B] [16] -1? ?0? ?0x00001400 - 0x0000143f (0x40) IX[B] [17] -1? ?0? ?0x00001080 - 0x000010ff (0x80) IX[B] [18] -1? ?0? ?0x00001440 - 0x0000145f (0x20) IX[B] [19] -1? ?0? ?0x00001060 - 0x0000107f (0x20) IX[B] [20] -1? ?0? ?0x00001470 - 0x0000147f (0x10) IX[B] [21] -1? ?0? ?0x00001460 - 0x0000146f (0x10) IX[B](B) (II) VMWARE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (WW) VMWARE(0): Failed to set up write-combining range (0xf0000000,0x1000000) (II) VMWARE(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits (==) VMWARE(0): Backing store disabled (==) VMWARE(0): Silken mouse enabled (WW) VMWARE(0): Option "AGPMode" is not used (WW) VMWARE(0): Option "AGPFastWrite" is not used (WW) VMWARE(0): Option "EnablePageFlip" is not used (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) VMWARE(0): vmmouse is available (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/input/mouse0" (**) Option "ZAxisMapping" "4 5" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Option "CoreKeyboard" (**) Keyboard0: Core Keyboard (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard0: XkbRules: "xorg" (**) Keyboard0: XkbModel: "dell101" (**) Option "XkbLayout" "us" (**) Keyboard0: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (II) VMWARE(0): VMMOUSE DEVICE_INIT (II) VMWARE(0): VMMOUSE DEVICE_ON (II) VMWARE(0): vmmouse enabled AUDIT: Mon Oct 31 15:14:54 2005: 11825 X: client 4 rejected from local host

xorg.conf:

Code:

# VMware SVGASection "ServerLayout" Identifier? ? ?"Simple Layout" Screen? ? ? ? ?"Screen 1" 0 0 InputDevice? ? "Mouse0" "CorePointer" InputDevice? ? "Keyboard0" "CoreKeyboard" EndSection Section "Files" EndSection Section "Module" Load? "freetype" # Load "xtt" Load? "extmod" Load? "glx" Load? "dri" Load? "dbe" Load? "record" Load? "xtrap" Load? "type1" #? ?Load? "speedo" EndSection Section "dri" Mode 0666 EndSection Section "InputDevice" Identifier? "Keyboard0" Driver? ? ? "keyboard" Option? ?? ? "XkbModel" "dell101" Option? ?? ? "XkbLayout" "us" EndSection Section "InputDevice" #? ? ?Option "Emulate3Timeout"? ? "50" #? ? ?Option "ChordMiddle" Identifier? "Mouse0" Driver? ? ? "vmmouse" Option? ?? ? "Protocol" "IMPS/2" Option? ?? ? "Device" "/dev/input/mouse0" Option? ?? ? "ZAxisMapping" "4 5" #? ? Option "Emulate3Buttons" EndSection Section "Monitor" Identifier? ?"vmware" VendorName? ?"VMware, Inc" HorizSync? ? 1.0 - 1000.0 VertRefresh? 1.0 - 1000.0 ModeLine? ? ?"640x480" 100.0 640 700 800 900 480 500 600 700 ModeLine? ? ?"800x600" 100.0 800 900 1000 1100 600 700 800 900 ModeLine? ? ?"1024x768" 100.0 1024 1100 1200 1300 768 800 900 1000 #odeLine? ? ?"1152x864" 100.0 1152 1200 1300 1400 864 900 1000 1100 #odeLine? ? ?"1152x900" 100.0 1152 1200 1300 1400 900 1000 1100 1200 ModeLine? ? ?"1280x1024" 100.0 1280 1300 1400 1500 1024 1100 1200 1300 #odeLine? ? ?"1376x1032" 100.0 1376 1400 1500 1600 1032 1100 1200 1300 ModeLine? ? ?"1600x1200" 100.0 1600 1700 1800 1900 1200 1300 1400 1500 #odeLine? ? ?"2364x1773" 100.0 2364 2400 2500 2600 1773 1800 1900 2000 EndSection Section "Device" Identifier? "VMware SVGA" Driver? ? ? "vmware" Option? ?? ? "AGPMode" ? ?"4" Option? ?? ? "AGPFastWrite" ? ?"True" Option? ?? ? "EnablePageFlip" ? ?"True" #Option? ?? ? "ForcePCIMode" ? ?"True" EndSection Section "Screen" # Don't specify DefaultColorDepth unless you know what you're # doing. It will override the driver's preferences which can # cause the X server not to run if the host doesn't support the # depth. Identifier "Screen 1" Device? ? ?"VMware SVGA" Monitor? ? "vmware" DefaultDepth? ? ?24 DefaultFbBpp? ? 32 SubSection "Display" # VGA mode: better left untouched Viewport? ?0 0 Depth? ? ?4 Modes? ? "640x480" EndSubSection SubSection "Display" Viewport? ?0 0 Depth? ? ?8 Modes? ? "1280x1024" EndSubSection SubSection "Display" Viewport? ?0 0 Depth? ? ?15 Modes? ? "1280x1024" EndSubSection SubSection "Display" Viewport? ?0 0 Depth? ? ?16 Modes? ? "1280x1024" EndSubSection SubSection "Display" Viewport? ?0 0 Depth? ? ?24 Modes? ? "1280x1024" EndSubSection EndSection

glxinfo:

Code:

name of display: :0.0 display: :0? screen: 0 direct rendering: No server glx vendor string: SGI server glx version string: 1.2 server glx extensions: GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_fbconfig client glx vendor string: SGI client glx version string: 1.4 client glx extensions: GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory, GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group GLX extensions: GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_fbconfig OpenGL vendor string: Mesa project: www.mesa3d.org OpenGL renderer string: Mesa GLX Indirect OpenGL version string: 1.2 (1.5 Mesa 6.2.1) OpenGL extensions: GL_ARB_depth_texture, GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp, GL_ARB_texture_cube_map, GL_ARB_texture_env_add, GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat, GL_ARB_transpose_matrix, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint, GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters, GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color, GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_two_side, GL_EXT_stencil_wrap, GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add, GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels, GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once, GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture, GL_NV_blend_square, GL_NV_point_sprite, GL_NV_texgen_reflection, GL_NV_texture_rectangle, GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow, GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays glu version: 1.3 glu extensions: GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tessvisual? x? bf lv rg d st colorbuffer ax dp st accumbuffer? ms? cav id dep cl sp sz l? ci b ro? r? g? b? a bf th cl? r? g? b? a ns b eat ---------------------------------------------------------------------- 0x22 24 tc? 0 24? 0 r? y? .? 8? 8? 8? 0? 0 16? 0? 0? 0? 0? 0? 0 0 None 0x23 24 tc? 0 24? 0 r? y? .? 8? 8? 8? 0? 0 16? 8 16 16 16? 0? 0 0 None 0x24 24 tc? 0 32? 0 r? y? .? 8? 8? 8? 8? 0 16? 8 16 16 16 16? 0 0 None 0x25 24 tc? 0 32? 0 r? .? .? 8? 8? 8? 8? 0 16? 8 16 16 16 16? 0 0 None

sorry for such a long post wasn't sure exactly what was relevant so posted everything